Hey guys!
I drive my 10 speed ZL1 100% of the time in "paddle shift mode" and when you start the car (hot or cold start does not matter) the car will not DFCO for the first 15-20 min of driving at lower RPM's or when your in higher gears. Like if you let off the gas the car never enters DFCO if your under 3,000rpm... Feels like I'm at 1-2% throttle and keeping the car coasting at the same speed.
My tuner and I maxed out all of the settings for the DFCO stuff and it makes zero difference!
I contacted HPT support but they are not tuners.
There has to be something in the tune to make this stop happening 😭
It's so annoying to drive for the first 15-20 min and it makes me not ever want to turn off the car once it starts DFCO'ing like if I'm somewhere pumping gas or getting food because then the "timer" starts all over again😭😭😭😭
I will pay someone to figure this shit out if needed! Help please!
.08-20-20 mODIFIED dfco tORUQE.hpt