My TB is closing on me hitting some limit I assume it's my virtual torque table, but I am a newbie to all of this. Here are my logs.
Few other issues, adding numbers to the VE table, I did the whole copy and paste multiply by half and my fueling got worse. When you add numbers into the VE table you're adding fuel correct?
Aem wideband 30-0334, I can get it to read with WB EQ Ratio 1 (SAE) and not using the specific aem pids.
Throttle body seems to be way higher than the accelerator.
Car is on E85
2013 Cruze