Results 1 to 3 of 3

Thread: Mach 1 Mustang 2021 model. Shaker kit

  1. #1
    Potential Tuner
    Join Date
    May 2022
    Posts
    1

    Mach 1 Mustang 2021 model. Shaker kit

    Hi Gents.

    Asking if there is a HP Tuner for the Mach 1 Mustang 2021 model.
    Or if we can tune these ECUs for a Shaker kit.

    We make these units and have found an issue with the tune due to
    the (we believe) ID the inlet tube, we will be Dyno tuning the car this week
    and so far, the ECU is having issues with the larger amount of air via the intake 4-1/2" ID.

    The kit has a inbuilt K&N air filer built into the body of the shaker, so air is direct to the throttle body.

    If there is a tune that we can over ride the stock tune and supply the customer with this tune as
    part of the sale of the Kit. That would be an Advantage to the customer.

    Any help would be greatly appreciated

    20220405_130806.jpg

  2. #2
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    631
    i am not sure HP supporting the Mach 1 yet. Can you post the Vin, I can pull the PCM calibration and see what it is.

  3. #3
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    emailed support waiting on response
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161