-
Tuner in Training
Fastest safe shift speed for NAG1?
Does anybody know how fast you can set the max shift time for nag1? I think stock for my 2010 Jeep SRT8 was 2400ms and I feel like that is a really slow shift. I was thinking about setting it to 1400ms and wanted to know if it was safe for a stock nag1 before I did so.
Thanks in advance
-
Advanced Tuner
If you assume (I have tested this) that these numbers in this section of software have an extra 0 (2400 is actually 240ms), then that is a slowish shift.
I use (1500) 150ms and the shifts are quick but not harsh, so (1400) 140ms should be fine.
When I first saw this 2400 number I thought I'd put in a better number like 200ms.
Turns out I actually commanded 20ms and just driving gently up road it was brutal, like it was going to break something.
Thought logically about it...realised tabled number was wrong, added a 0 like it wanted and all was good again. Be aware however that in other parts of trans software the ms are correct...
-
Advanced Tuner
I've never lowered this shift speed before, i always adjust with the ramp tables but i might consider trying it.. tho i haven't ever had issue with it taking long.
-
Tuner in Training
Well im glad youve tested it. I was going to set mine to 800ms in the editor cause I thought it was really just that slow.