-
Tuner in Training
8 Wire MAF Baro Breakout
Hi,
Sorry if this is covered... I just want to triple check what I am about to do.
So I am going to breakout my 1 BAR map sensor and use it as the baro sensor.
So here is what I am going to do:
~ Tap 2 MAP into 2 MAF
~ Tap 3 MAP into 3 MAF
~ Cut 4 MAF(yellow/white)
~ Connect 4 MAP(orange/black) to yellow/white in harness to PCM (not into the plug side to MAF sensor)
Are there any settings that need to be changed in the tune?
Am I missing anything?
Thanks!
-Josh
2017SilveradoMAF_BreakoutBaro.jpg
-
Tuner in Training
-
Tuner in Training
crickets... Should I ask the question differently?
What wires do what on the baro sensor?