Results 1 to 3 of 3

Thread: 8 Wire MAF Baro Breakout

  1. #1
    Tuner in Training
    Join Date
    Aug 2020
    Location
    WASHINGTON (WA)
    Posts
    41

    8 Wire MAF Baro Breakout

    Hi,

    Sorry if this is covered... I just want to triple check what I am about to do.

    So I am going to breakout my 1 BAR map sensor and use it as the baro sensor.
    So here is what I am going to do:

    ~ Tap 2 MAP into 2 MAF

    ~ Tap 3 MAP into 3 MAF

    ~ Cut 4 MAF(yellow/white)

    ~ Connect 4 MAP(orange/black) to yellow/white in harness to PCM (not into the plug side to MAF sensor)

    Are there any settings that need to be changed in the tune?

    Am I missing anything?

    Thanks!
    -Josh

    2017SilveradoMAF_BreakoutBaro.jpg

  2. #2
    Tuner in Training
    Join Date
    Aug 2020
    Location
    WASHINGTON (WA)
    Posts
    41
    Any thoughts?

  3. #3
    Tuner in Training
    Join Date
    Aug 2020
    Location
    WASHINGTON (WA)
    Posts
    41
    crickets... Should I ask the question differently?
    What wires do what on the baro sensor?