Results 1 to 4 of 4

Thread: SWAP ECU of CHEVROLET TAHOE 2016 from

  1. #1
    Potential Tuner
    Join Date
    May 2019
    Posts
    6

    SWAP ECU of CHEVROLET TAHOE 2016 from

    Dear ALL ,
    My interface ID is 2052519912
    please support , I was trying to swap
    From
    ecu of VIN 1GNSC7EC2HR512868 2017 in dam-yard
    To
    a vehicle in my workshop VIN 1GNSC7EC8GR151340 2016
    I have already purchased credit for VIN ECU of dampyard 1GNSC7EC2HR512868 when I disable VATS by HPTUNER but still no start no crank with dampyard ecu ,
    can you please support
    Regards
    Kazam Ali

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,513
    You can't do that.

    The 2016 is a E92 and the 2017 is a E92A computer. You can see that under the calibration details at the top.

    The E92A was only used from 2017-2019 in the Tahoe and can't be swapped into an older 2015-2016 Tahoe.

    You will have to get a regular E92 computer to use in your 2016 Tahoe. You also need to flash the PCM/TCM with a GM tool first because you can't flash a new VIN/OS into the TCM using HP Tuners. They need to match for everything to work.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Potential Tuner
    Join Date
    May 2019
    Posts
    6
    Quote Originally Posted by 5FDP View Post
    You can't do that.

    The 2016 is a E92 and the 2017 is a E92A computer. You can see that under the calibration details at the top.

    The E92A was only used from 2017-2019 in the Tahoe and can't be swapped into an older 2015-2016 Tahoe.

    You will have to get a regular E92 computer to use in your 2016 Tahoe. You also need to flash the PCM/TCM with a GM tool first because you can't flash a new VIN/OS into the TCM using HP Tuners. They need to match for everything to work.

  4. #4
    Potential Tuner
    Join Date
    May 2019
    Posts
    6
    Appreciate your support Sir ... really helpful information. Can tou please suggest a good & economic tool for flash ... maxi 908 is good for this or nor