New laptop running Windows 10
VCM editor version 4.8.7
have done a resync on interface
Begins reads, reaches 6% then halts and times out ...read failed.
Problem with interface???
New laptop running Windows 10
VCM editor version 4.8.7
have done a resync on interface
Begins reads, reaches 6% then halts and times out ...read failed.
Problem with interface???
try reading the ecm via bench harness to rule out wiring/battery issue.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
what vehicle/operating system?
I don't have a bench harness.
After a number of attempts, I was able to do a low speed read.
Have no problem with doing a scan/datalog
2005 GM 5.3L P59 ecm
What puzzles me is things worked fine the first few months I had it together.
Make sure you you download the latest Netframework 4.8 most current as of nowhttps://dotnet.microsoft.com/downloa...ramework/net48 This cleared up my sync issues with the new 4.8.7 update. Hope this helps
I checked the Netframework, my system already had the newest version.