Can someone look my tune over and see if I missed something
Its a LQ4 with 243's TBSS 2010 flex injectors. Timing goes -20 at start up and after it goes into CL the trims are everywhere
03 Chevy Express 2500 6.0 4L80e TBSS Flex Fuel 2010 Flex Injectors.hpt
Did you use the excel spreadsheet to put the data into the LS1 format?
Are you using the GEN 4 style MAP sensor?
Is this a cable throttle body or drive by wire??
Can you post a log file?
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
If you're referring to this excel >> http://files.hptuners.com/support/Ex...orscalels2.xls << it doesn't exist
Gen4 map tune was changed to 128.20 kPa
Wire
I'll post up a log tomorrow, I don't know where the one I had went
I was meaning the injector data spreadsheet.
Use this to copy the GEN 4 data into and it will spit out the GEN 3 format you need for it.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Supernova.xlsx I used this one
Here's a log, this time timing didn't drop like before. ignore the misfires I forgot I had higher the detection and forgot to change it back
Reply With Quote