-
Tuner in Training
Alcohol percent % not reading
Hey guys so I just updated to version 4.8.7 and repolled everything and I can't get the Alcohol percentage % to read.
I rechecked the plug itself power and ground checked out fine and where they should be also checked the signal wire with the frequency option on my power probe and it gave me a 1.14 hz. So I got a reading but nothing in the scanner... Any ideas greatly appreciated
-
Tuner
what vehicle do you have. if your vehicle is flex fuel capable but without a sensor, it requires a fill up after ECU code clearing for it to calculate ethanol percentage. this only works if you started with the designated gasoline for your car before adding e85.
-
Potential Tuner