Adding tables

[Speed39]

My current rpm limit in VE tables and PE tables as well as all other tables is limited to 5750 rpm give or take. I turn this 5.7 hemi 6800+rpm. How can I tune to that rpm with the tables stopping at the lower rpm. Can the tables be changed to add more rpm to be able to tune the higher rpm?
Thanks.
Colin

[malikib]

My current rpm limit in VE tables and PE tables as well as all other tables is limited to 5750 rpm give or take. I turn this 5.7 hemi 6800+rpm. How can I tune to that rpm with the tables stopping at the lower rpm. Can the tables be changed to add more rpm to be able to tune the higher rpm?
Thanks.
Colin

Yes you can edit the axis by clicking to the axis label on top of the table and so on

[Speed39]

Yes you can edit the axis by clicking to the axis label on top of the table and so on

Thanks.
I see I can change the rpm in each row, but can I add rows or do I just edit the rows that's there ?

[Speed39]

Yes you can edit the axis by clicking to the axis label on top of the table and so on

I got it thanks. Change my max rpm and then interpolate.