Hi everyone. Total rookie here. I have a 66 Chevelle LS2/T56 with a DBC P01 ECM. It has a Tick Performance Cam (231/235 | .625"/.605" | LSA111+2), 102mm throttle body and sheet metal intake, LS7 Card style maf, Hooker Blackheart headers and Borla Exhaust. This is is my first time tuning anything so don't hold back. I have the car running good as in it starts up good when it's cold or hot, and drives great in all conditions except one. When i push the clutch in when coming to a stop it tries to die (Idle drops to ~600 and sometimes lower or dies) As soon as the VSS reads 0 in the scanner, the idle pops right back up to where it it supposed to be. If I disconnect the VSS it seems to run great all the time but then I don't have a speedo. What would I look at to correct this issue? I have included the tune and a scan of quick drive. Thanks everyone.