Results 1 to 1 of 1

Thread: I need more cells hit in scanner-boost eq

  1. #1
    Senior Tuner Lakegoat's Avatar
    Join Date
    Jul 2012
    Location
    Florida
    Posts
    1,424

    I need more cells hit in scanner-boost eq

    From 3000 rpm I push the throttle to 100%. Map goes from low reading to 200kpa almost immediately. I don't get any cell hits from 120 to 170 kpa on my boost eq graph. My hit count is 1, is there a way to get some more cell hit info so I can better adjust my ve table?

    I used the wideband reading in channels to fill in the blanks. Just scrolled along and watched the reading change.
    Last edited by Lakegoat; 09-22-2020 at 03:23 PM.
    2000 Camaro SS 2015 L83 port injected, Whipple 3.0, 4L80E, 8.8 Ford
    2013 Silverado 5.3, 6L80k 8.8