Results 1 to 2 of 2

Thread: AEM X-series Boost -> Pro link analog issues..

  1. #1
    Potential Tuner
    Join Date
    Sep 2020
    Posts
    3

    AEM X-series Boost -> Pro link analog issues..

    I'm attempting to add my AEM 30-0309 into VCM scanner. It's connected correctly to the Pro-link analog input wires. I've tried creating a user defined sensor with the math provided by AEM which gives an incorrect result in the scanner.

    Per the AEM Manual: psig = (3.75 * Volts) -1.88


    The only way I get can VCM scanner to show anything is with the pre-defined "AEM 30-4406" transform. Which obviously is also incorrect but hey it's proof that it's reading something...? I had a similar issue with my 03-0300 wideband which is also connected to the pro-link. That was a matter of just adjusting the equation to correct the result. I'm betting the boost side is the same issue but there is zero documentation/discussion that I can find on how to convert the AEM equations into something that works with the pro-link.
    Last edited by PhoS; 09-27-2020 at 12:48 PM.

  2. #2
    Potential Tuner
    Join Date
    Sep 2020
    Posts
    3
    Bumping this, I'd still love to get this input working.