Results 1 to 1 of 1

Thread: MAF HZ stopping at 10k-5200rpm normal?

  1. #1
    Potential Tuner
    Join Date
    Jun 2020
    Location
    nw ohio
    Posts
    1

    MAF HZ stopping at 10k-5200rpm normal?

    ive been chasing my tail for months with my 2011 caprice trying to figure out why car acts really lazy on longer pulls(past 1/8 miles starts to feel like its laying down in power)

    been listening to multiple people and tried few different tuners and im missing something in my setup. best trap speed ive gotten is a 111mph and car ive copied is running 120s. Also, quite a few comparable builds are running far better traps. But ive noticed on short hits car runs fantastic, but longer the pull the worse it runs

    my setup is pretty basic
    SBE L77
    VCM OTR
    cnc ported stock heads, also milled .035
    ported intake manifold with rails added
    ported stock throttle body
    blueline performance shots fired cam
    circle D 4dp converter
    3.27 camaro diff swap
    275/50/17 m&h racemaster drag radials
    Attached Files Attached Files
    11 caprice ppv l77
    cam/stall/gear
    best pass to date 12.43@111