throttle hang from 2k to 3k

[Speed39]

Ok issue with throttle hang around 2k up to 3k rpm range under light throttle. It will stay at the rpm it is at between those rpms when letting off and clutch in to shift . 6 speed 2016 challenger rt.5.7
any ideas?

[spoolboy]

Is it stock?

What did you change?

Are you trying to get the bangy poppies?

[Speed39]

Is it stock?

What did you change?

Are you trying to get the bangy poppies?

No don't want any popping. rpm hangs between gears if between 2-3k rpm.
stock 5.7 cam, long tubes, no cats, Holley sniper intake . I turned off throttle adaptation . will see how that goes but that seems to do the trick.
Engine pulls hard to 6800 rpm

[malikib]

No don't want any popping. rpm hangs between gears if between 2-3k rpm.
stock 5.7 cam, long tubes, no cats, Holley sniper intake . I turned off throttle adaptation . will see how that goes but that seems to do the trick.
Engine pulls hard to 6800 rpm

log throttle voltage at the point that hangs the throttle and then raise that value in the throttle airflow model

[Speed39]

log throttle voltage at the point that hangs the throttle and then raise that value in the throttle airflow model

Thanks, I will give that a try.