Results 1 to 5 of 5

Thread: Vehicle wont start after reading the vehicle

  1. 10-22-2020 #1
    Jawz
    Jawz is offline
    Potential Tuner
    Join Date
    Oct 2020
    Location
    Goodview, VA
    Posts
    6

    Vehicle wont start after reading the vehicle

    Hi, I just tried to read my vehicle. When it got done it wouldn't start. Dang It!! Please Help I am new here...
    I think this thing is a crate motor im not sure but here is the vin it read if anyone can tell me 19258269LS376REL8
    Last edited by Jawz; 10-22-2020 at 04:02 PM.
    Reply With Quote Reply With Quote
  2. 10-22-2020 #2
    Spencer@HeroldMotorsports
    Spencer@HeroldMotorsports is offline
    Potential Tuner
    Join Date
    Oct 2020
    Location
    Houston, TX
    Posts
    2
    When you say it wont start what exactly do you mean?
    Is it cranking?
    Or absolutely nothing happens with the ignition is pressed.
    Reply With Quote Reply With Quote
  3. 10-22-2020 #3
    kevin87turbot
    kevin87turbot is offline
    Senior Tuner
    Join Date
    Mar 2011
    Location
    Ripley, MS
    Posts
    1,865
    I've had a couple of instances over the years that the BCM wouldn't wake up after reading or writing the ECM.

    One of the earlier versions of HP Tuners had a issue with this. I'm thinking Version 3.5x?

    Scan it and see if there is a BCM lost comm code. If that's the case, you have to replace the BCM.
    Reply With Quote Reply With Quote
  4. 10-23-2020 #4
    Jawz
    Jawz is offline
    Potential Tuner
    Join Date
    Oct 2020
    Location
    Goodview, VA
    Posts
    6
    It Cranks, just no fire.
    Reply With Quote Reply With Quote
  5. 10-23-2020 #5
    Jawz
    Jawz is offline
    Potential Tuner
    Join Date
    Oct 2020
    Location
    Goodview, VA
    Posts
    6
    It Lives!!! Thankz Guyz. But I think I have a fuel bleedoff problem that wouldn't give it enough fuel to fire.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »