hey guys,
I'm relatively new to tuning and I'm working on my first swap. It's a 2005 6.0L going into my 1970 Chevelle.
The engine:
stock bore 6.0L
ported 243 heads milled 0.020 (should be somewhere around 10.8:1 compression)
Tick SNS stage 2 cam 231/235 duration .625/.605 lift with an LSA of 111+2 (10.7 degrees of overlap)
edelbrock victor jr intake
holly universal throttle body 1000cfm
deatschWerks 50LB injectors
it'll be running through a 4l80e with a shift kit and a circle d 3500 stall converter which is hooked to a 12 bolt posi with 4.11:1 gears.
I've been doing a lot of reading and watching to figure out the software and I think I have a decent grasp on it. This is my base tune for the car to hopefully get it up and running. I'm hoping I can get some feedback on how the tune looks. Thanks in advance
chevelle base tune stage 1 fuel 4.hpt