Results 1 to 13 of 13

Thread: Can HPT break down the VR30 Load/TQ conv. 1 & 2 tables?

  1. #1
    Advanced Tuner
    Join Date
    May 2009
    Posts
    479

    Can HPT break down the VR30 Load/TQ conv. 1 & 2 tables?

    Trying to get a better understanding of exactly what these tables do. So far it seems as though *lowering* the Load/TQ 2 tables increase both throttle and up/down shift response and TQ1 table may increase boost The tq1 conversion tables are higher on the redsport than they are on the silver sport.
    2018 Infiniti Q60s


    2004 350z/LS2: ERL 434ci, 11.8:1,TFS245cc,262/266@113+3,Fast102,NX 102 plate,60#injectors/return w/twin 255s
    Old setup: CNC'd317s, Fast 102, 228/228@114, PT88,83#injectors/full return system. 10.84@138

  2. #2
    Advanced Tuner
    Join Date
    May 2009
    Posts
    479
    Finally got all of these tables figured out nicely.
    2018 Infiniti Q60s


    2004 350z/LS2: ERL 434ci, 11.8:1,TFS245cc,262/266@113+3,Fast102,NX 102 plate,60#injectors/return w/twin 255s
    Old setup: CNC'd317s, Fast 102, 228/228@114, PT88,83#injectors/full return system. 10.84@138

  3. #3
    so this is worth spending $300 on? you can make a silver car a red car?
    i can't find a dett file anywhere to even have a look.

  4. #4
    Quote Originally Posted by caenews@hotmail.com View Post
    so this is worth spending $300 on? you can make a silver car a red car?
    i can't find a dett file anywhere to even have a look.
    5CJ9D.hpt

    Here you go. I would say it's worth it, but I'm a little biased

  5. #5
    that works, thanks. so just up the boost targets and torque tables to get more boost?

  6. #6
    is that a 300 or 400hp file?

  7. #7
    Quote Originally Posted by caenews@hotmail.com View Post
    is that a 300 or 400hp file?
    Pretty positive it's from a Silver Sport, I'll have to check my files tomorrow. I have a red sport as well, i just need to figure out an OS ID of one. If you search these forums though both SS and RS files have been posted here in the past.

  8. #8
    Potential Tuner
    Join Date
    May 2021
    Posts
    7
    Quote Originally Posted by caenews@hotmail.com View Post
    that works, thanks. so just up the boost targets and torque tables to get more boost?
    More to it than that. DM me your email and I?ll send you an RS file. Run the compare tables option and look at what tables are changed to achieve the extra 100hp. Then use that make your future changes. I?ve achieved 18.5 psi doing this.

  9. #9
    it's what you see, the hotmail. super appreciate it.

  10. #10
    Potential Tuner
    Join Date
    May 2021
    Posts
    7
    Quote Originally Posted by caenews@hotmail.com View Post
    it's what you see, the hotmail. super appreciate it.
    Sent

  11. #11
    got it. thank you!

  12. #12
    Potential Tuner
    Join Date
    Jun 2021
    Location
    Connecticut
    Posts
    1
    These are just torque limit tables but have to be raised together. If you lower table 1 alone, the throttle response goes down, if you raise table 2 alone, the throttle response goes down. If you raise table 1 alone, response picks up and if you lower table 2, the same happens. They both have to be raised together.

  13. #13
    Potential Tuner
    Join Date
    Jul 2021
    Posts
    1
    Quote Originally Posted by Snyper View Post
    Finally got all of these tables figured out nicely.
    you WOULD revive your own thread