Results 1 to 2 of 2

Thread: back to BBL on MPVI after long time - huge fail ?

  1. #1
    Advanced Tuner Boost's Avatar
    Join Date
    Dec 2006
    Location
    Florida, USA
    Posts
    303

    back to BBL on MPVI after long time - huge fail ?

    Hello everyone,

    I have been using my MVPI2 Pro via bluetooth to datalog 1/8 mile runs, and it works great except I don't like the laptop buckled into the passenger seat and causing a bright light as well as the battery going dead or occasionally the whole thing goes flying.

    So I reverted back to using the MPVI dropped into the driver door panel, the cable doesn't bother that way. Last time I used like that was many years ago and it worked great. This time I made sure to write the configuration for PIDs and made sure the light was on when I press record. To my disappointment at the end of the pass the error light was on and no recording could be retrieved nothing to read or erase.

    Wondering what it could be, issue with the SD card or needs some kind of update? In the video below I did not get any data for the first four passes until I set the bluetooth MPVI2 back up again. Thanks

    '12 Caprice PPV 6.0 L77 - daily transportation
    8.7 @ 84 (1/8 mile) bolt-ons

    '02 Silverado RCSB 5.3 L59 - regularly street driven
    8.2 @ 86 (1/8 mile) stock cam and spray
    8.6 @ 84 (1/8 mile) cam and heads no spray

    Our YOUTUBE CHANNEL featuring the Silverado

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"