Results 1 to 1 of 1

Thread: Need 2012+ Jeep Wrangler ECM/TCM file for 6.2 Gen V Motech swapped JK

  1. #1
    Potential Tuner
    Join Date
    Oct 2020
    Location
    Arkansas
    Posts
    4

    Need 2012+ Jeep Wrangler ECM/TCM file for 6.2 Gen V Motech swapped JK

    I need a Jeep ECM file that has a Motech swap kit with everything working to compare to mine. I have a 2012 JKU Rubicon with a Gen V 6.2L L86 and 10L80 transmission. My cruise control indicator goes on and off with the steering wheel button but the cruise won't set at any speed. Also, the speedo on my dash is accurate within a couple MPH of actual GPS speed at 75MPH, but when scanning the GM ECM it shows around 97MPH. I am also not sure if the Fuel EVAP and Oxygen are supposed to show incomplete in the GM ECM as shown below. Below that are a couple of screenshots of my current DTCs and Freeze Frame from the JEEP ECM. I am also attaching my current ECM files.

    GM DTCs
    dtcs_from_gm_ecu_2cb79866d2d43466393981a65b684b877d1154f5.jpg

    Jeep ECM DTCs
    11-17-2020 DTCs Jeep ECM.JPG

    Jeep ECM Freeze Frame
    11-17-2020 freeze frame Jeep ECM.JPG
    Last edited by JeepinAR; 11-17-2020 at 07:17 AM. Reason: Add screenshots