Since PBD has gone dark on the project I'm going to go public with this information, I figured out nearly all of the information regarding how to do this swap anyways.
Before you run out to the garage, there are still quirks with the setup that might require ford IDS to fix. You will have to contact Hptuners to see if they figured out the issues with it.
#1 wire map sensor as shown
#2 2018 cobrajet strategy swap
#3 random readings in VCM scanner
Solution to finalize the issues should be easy, just need to get VCM scanner to read it as a 2018 cobrajet, so like I said once HPT gets that fixed it's literally an easy swap.
I found the company that produces the cobra-jet wiring harness and it ended up working.
Last edited by kryptoxide; 11-19-2020 at 09:53 AM.