Hey all I have a fresh rebuilt 6l80 w/ Circle D triple disc converter. Shifts are crisp and firm but has a little lugging between 50 and 60 (very lightly but there) and overall I just want to be sure I don't damage any thing. Can someone look over my tune and take a look at Apply ramp, Regulator offset, and Adapts and make a few recommendations?
For the most part everything seems great however the only speed it seems to truly like to downshift quickly is around 40 mph - downshift is quick and hits every shift point beautifully. If I just punch it at 60,65, 70 it doesn't seem to downshift and drop as quickly or it will hit lower in the RPM range in 3rd for instance instead of dropping to the top of 2nd
Trans Rebuild
New pump, New converter housing ,Zip kit, New pressure switch films, Billet 1,2,3,4 piston, 4,5,6 HD piston, Red Clutches except 3,5,R is Alto G3 Powerpack
Converter
3600 -3800 Circle D Triple Disc
Tune
G8ASFOUNDLIKECURRENTSPARK2.hpt
Most recent Log
20-11-28 09-03-08.hpl