because it seems like 10% success right if that in getting things to clear/reset. Theres multiple "clear DTC" buttons. Does it work properly on stable release and not the beta version I always seem to be on?
because it seems like 10% success right if that in getting things to clear/reset. Theres multiple "clear DTC" buttons. Does it work properly on stable release and not the beta version I always seem to be on?
Factory Stock 97 SS M6 13.51 @ 104.3 mph
Stock Longblock LS1 w/ 233/238 P.S.I. Cam
10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago
'99 TA trunk mounted 76mm 6 Liter
9.0s in '09 @ 153 MPH
Turbo 5.3 Volvo 740 Wagon
32psi and still winding out 5th on the highway somewhere
I've had hit or miss on clearing codes with either beta or stable release. Oddly sometimes rebooting the laptop solves it. Odd.
You can't clear permanent codes with HP tuners. The PCM will clear them if it sees data it likes or some same you need to reflash the PCM with a dealer type tool. As for throttle relearn, I find on GPEC2A PCMs the relearn in VCMscanner in special functions works but on older controllers I use the relearn in AlfaOBD...seemed to work on my buddy's 300 SRT8. Generally I clear all adaptives when I do a throttle relearn.
That's not correct. HPT clears codes on my Hellcat just seems to be hit or miss how many times I have to hit clear codes to get it to work.
So you can clear permanent codes with HPT? You must have a special edition because anytime I had O2 related codes that were permanent on my 2015 RT I could not clear them.
https://forum.hptuners.com/showthrea...ary-O2-sensors
I know HPT can't clear P1400.
Last edited by Homer; 12-22-2020 at 10:53 AM.
1400 is a special case as it's reported from the BCM.
Yes, I can clear permanent codes with HPT no problem, it sometimes just takes a few clicks of the button as it were. If the condition that caused the code persists then obviously it just comes back, however.
Last edited by Homer; 12-22-2020 at 01:09 PM.
Is U1424 set by BCM too thats why Im not having any luck getting it to reset, and if so what exactly is it saying is wrong? Ive had a dead car for months because of this with nothing appearing to be wrong other than sets code immediate
Factory Stock 97 SS M6 13.51 @ 104.3 mph
Stock Longblock LS1 w/ 233/238 P.S.I. Cam
10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago
'99 TA trunk mounted 76mm 6 Liter
9.0s in '09 @ 153 MPH
Turbo 5.3 Volvo 740 Wagon
32psi and still winding out 5th on the highway somewhere
That is a TCM code, implausible engine torque received which is not permanent and should clear but can pop back up if you drive.
Factory Stock 97 SS M6 13.51 @ 104.3 mph
Stock Longblock LS1 w/ 233/238 P.S.I. Cam
10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago
'99 TA trunk mounted 76mm 6 Liter
9.0s in '09 @ 153 MPH
Turbo 5.3 Volvo 740 Wagon
32psi and still winding out 5th on the highway somewhere
Set all the torque management back to stock and try again.
If in doubt, multiply everything by 1.1.