Results 1 to 2 of 2

Thread: Gmpp ls3 mil on, no codes

  1. #1
    Tuner in Training
    Join Date
    Apr 2004
    Location
    Posts
    34

    Gmpp ls3 mil on, no codes

    Have any of you guys run into this, an MIL commanded with no issues, no codes? TIA

  2. #2
    Tuner in Training
    Join Date
    Apr 2004
    Location
    Posts
    34
    I solved it. The Dakota Digital RTX control system caused it, not enough load for the MIL light circuit. A 4600 ohm resistor wired from switched power to the MIL control CKT fixed it. The controller is a gen4 GMPP LS3.