After building my 50% scaled tune for my 06 GTO I've been trying to correct the mpg calculator for my dash display but cant seem to find any kind of fuel density option anywhere. I'm using version 4.4.4 if that matters. Thanks.
After building my 50% scaled tune for my 06 GTO I've been trying to correct the mpg calculator for my dash display but cant seem to find any kind of fuel density option anywhere. I'm using version 4.4.4 if that matters. Thanks.
Make sure your in advanced view.
go to Fuel and the general tab. it's on the left
Scale it the same as the injectors. If you scaled 50%, cut the number in half.
from there make small changes. Once I did the half, I waited until I filled up again, and compared the reading to my calculated MPG. adjust by the percentage off and wait till the next fill-up.
only took 2 fill-ups to get it pretty much dead on.
screenshot
https://drive.google.com/file/d/13ZG...ew?usp=sharing
2006 Pontiac GTO
M6
Flex Fuel enabled
FIC1000 shorty Injectors
DW300C Fuel pump
UPP GTO Auxiliary fuel system
BoostDistrict LSA Conversion
BTR Stage 3 PDS Torque cam and kit
Kooks Longtube headers with High Flow Cat mids
BoostDistrict LSA CAI with LS7 MAF module
Mickey Mouse Catch Can
Hinson 1/2" lowered Engine Mounts
Magnaflow 3" Cat Back Competition Exhaust
PLX DM-6 Wideband
Turbo Technologies Full Flex fuel Tune
That's strange. Just took my tune, loaded it in, applied the 2 bar patch, saved it as a new tune file name, closed out, opened the new file and it's still there...
2006 Pontiac GTO
M6
Flex Fuel enabled
FIC1000 shorty Injectors
DW300C Fuel pump
UPP GTO Auxiliary fuel system
BoostDistrict LSA Conversion
BTR Stage 3 PDS Torque cam and kit
Kooks Longtube headers with High Flow Cat mids
BoostDistrict LSA CAI with LS7 MAF module
Mickey Mouse Catch Can
Hinson 1/2" lowered Engine Mounts
Magnaflow 3" Cat Back Competition Exhaust
PLX DM-6 Wideband
Turbo Technologies Full Flex fuel Tune
try using 4.8 update as alot was added to it that i noticed in mine
I'm running 4.4.2 still
2006 Pontiac GTO
M6
Flex Fuel enabled
FIC1000 shorty Injectors
DW300C Fuel pump
UPP GTO Auxiliary fuel system
BoostDistrict LSA Conversion
BTR Stage 3 PDS Torque cam and kit
Kooks Longtube headers with High Flow Cat mids
BoostDistrict LSA CAI with LS7 MAF module
Mickey Mouse Catch Can
Hinson 1/2" lowered Engine Mounts
Magnaflow 3" Cat Back Competition Exhaust
PLX DM-6 Wideband
Turbo Technologies Full Flex fuel Tune
Well, i tried loading the stock GTO tune and the car wouldn't start. It wouldn't even turn over so i loaded the previous tune and it started up just fine. I must've missed something when converting the tune file but im at a loss for what it could be since i copied everything over using the compare function. The only thing i can think of is im not using a GTO ecm so the GTO logic isnt being recognized?
The GTO ECM is specific to the GTO. Other E40 ECM'S don't run in the GTO
Edit your original tune file and verify/make sure the OS is the same and you didn't accidently overwrite your OEM OS file with another. Make the necessary adjustments in the original file, re-apply the 2bar OS and then copy your other settings over into the tune.
However if it's displayed in the original OS it "should" also be shown with the custom OS applied.
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400