I'm new to the HP Tuners. My wife's Impala threw a code for an evap purge valve, and I am replacing that. But I noticed also at idle that the tps sits at over 19%. That doesn't seem right. Anything I should be concerned about?
I'm new to the HP Tuners. My wife's Impala threw a code for an evap purge valve, and I am replacing that. But I noticed also at idle that the tps sits at over 19%. That doesn't seem right. Anything I should be concerned about?
Depends on what year it is
a little more info would be helpfull
Michael Bray
Rusty Knuckle Garage
Slidell, Louisiana
20yr Master Tech.
Advanced Level Specialist
Custom Car Fabrication, Customization, High Performance.
GM World Class Technician
Shop Owner
I suppose so.
2016 V6 ltz
Scanning with hp tuner with foot off throttle and idling smoothly...around 19%
No worries, that is the actual throttle blade. Check Accelerator Pedal position.
That would be normal on that car, there is not idle air control valve, it is all done with the throttle blade, so it has to be open to control idle
Michael Bray
Rusty Knuckle Garage
Slidell, Louisiana
20yr Master Tech.
Advanced Level Specialist
Custom Car Fabrication, Customization, High Performance.
GM World Class Technician
Shop Owner