Spent last couple of days getting the wiring done in engine bay. Grounded good. Fuel pressure good. All fluids good. First crank. Fuses good. Battery good.
I wrote tune (from tuner), turns over but does not fire up. Can't get hold of tuner today, double check my wires, look fine. I've done swap before, but had vvt delete with btr stage 3 on this motor (btr vvt delete kit), ly6, new build.
Attaching tune file. Wondering where to go now...
The camshaft selection under the variable camshaft tab still says "one" like it has a VVT camshaft installed. Set it to none if you removed it. Hopefully you installed a non VVT front cover as well.
A log file is going to be more helpful here.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
I noticed that also, will change in the tune, and get logs...
ok, rookie mistake. Did write entire, fired up. No changes to tune. Emailed my tuner, will address vvt delete. thanks all
Reply With Quote