Without knowing how close your speed density is too accurate I’m gonna say start looking there
Without knowing how close your speed density is too accurate I’m gonna say start looking there
If your using flex fuel logic in a booster application, your speed density has to be spot on...
Well I’m located In Houston. Message me and I will take a look
I don't believe its a speed density problem. If it were, it would not read content correctly the revision before I changed the idle speed.
Also I see the exact same issue on 100% stock mustangs with a flex fuel tune. Again it'll be a random 1/100 type of thing.
One car will read ethanol and another will not with essentially the same tune, just slight changes.
ctm2 is a 2018 Mustang where the flex fuel is functioning perfect
Dredayz_5.0Rev7 is the 7th revision on a 2019 Mustang because I could not get it to read content.
from tunes posted they several several changes --have u just installed 18 tune into 19 and see if that works ?
'