Results 1 to 6 of 6

Thread: Year/Make/Model type purchase rather than individual credits.

  1. #1
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12

    Year/Make/Model type purchase rather than individual credits.

    I saw somewhere that you can buy support for a particular year/make/model for 5 credits(or something to that effect)

    I have several 2005 Ram PCMs. I swapped my project truck with a 5.7 and used a 2005 Ram PCM. I bought 3 PCMs for this project as I wasn't certain what my end need would be.
    2 I bought from the same seller that programmed my VIN and mileage into the modules. The problem with the end result is the year is displayed as 2031 in VCMeditor. In my DRBiii it shows the 2001 year of my VIN.

    The 3rd PCM hasn't arrived yet, but it's a 2005 Ram 4.7 PCM incase I want to run a cable throttle body. It hasn't been programmed in any way so I assume it'll show the correct year in both softwares.

    With these three PCMs would I be able to purchase the 2005 Ram package rather than 3 individual licenses?

    PCM Part numbers are:
    56028955AI - 2005 Ram 5.7 (Skim not enabled)
    56028967AH - 2005 Ram 5.7 (Skim Enabled)
    56028941AC - 2005 Ram 4.7 (Skim unknown)

  2. #2
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774
    They don't support that anymore. If it's not listed on the vehicles page then it's not available for that platform.
    Daily Driver= 2003 BMW 330xi
    Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
    Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
    Truck= 2007 Chevy Silverado 1500 LT LY5 4x4

  3. #3
    Advanced Tuner
    Join Date
    Jan 2014
    Location
    Waldorf MD
    Posts
    774
    Have you licensed the file?
    Daily Driver= 2003 BMW 330xi
    Weekend Cruiser= 2009 Pontiac G8 GT (Vararam, TSP LS3 N/A Stage 1, OBX, CTS-V converter, MagnaFlows w/ J-Pipes, 160 t-stat)
    Project Car= 1991 Chevrolet Camaro RS (LQ4 w/ Gen 4 Rods, LS3 heads, turbo...)
    Truck= 2007 Chevy Silverado 1500 LT LY5 4x4

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    We've never offered year/model licenses for any dodge application and likely never will. Single vcm only for these.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Thanks Bill.

    Looking at the Supported Vehicles list, it's clearly shown. When I was looking at this list before I purchased my unit I didn't realize this type of licensing was available for some nor was I looking for that at the time.

    NotAvailable.PNG
    Last edited by porter84; 12-31-2020 at 08:22 AM. Reason: added information

  6. #6
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Quote Originally Posted by jaydubb71 View Post
    They don't support that anymore. If it's not listed on the vehicles page then it's not available for that platform.
    Thanks. It doesn't hurt to hope. Could've saved me a good chunk of change