Results 1 to 4 of 4

Thread: Ford Aluminator 52XS with Gen 2 PCM Help - CM-12A650-DRA

  1. 12-31-2020 #1
    XLAutomation
    XLAutomation is offline
    Potential Tuner
    Join Date
    Dec 2020
    Posts
    5

    Ford Aluminator 52XS with Gen 2 PCM Help - CM-12A650-DRA

    Hello, I am trying to figure out which controller to select for my PCM. It is a CM-12A650-DRA, P/N RMFR3A-12A560-DRA. I looked in the sticky thread " FRPP Crate PCM and Aftermarket Calibration Support : Extra Steps", but this controller isn't there, though close to the TC-1791.

    Can anyone help?

    Thanks so much!
    Michael
    Reply With Quote Reply With Quote
  2. 01-02-2021 #2
    XLAutomation
    XLAutomation is offline
    Potential Tuner
    Join Date
    Dec 2020
    Posts
    5
    Eric Brooks says TC-1791. I was able to choose that, and get a good upload, make changes, and download successfully. Thanks, Eric!
    Reply With Quote Reply With Quote
  3. 03-02-2022 #3
    mstang_man
    mstang_man is online now
    Advanced Tuner
    Join Date
    Feb 2012
    Location
    TEXAS
    Posts
    639
    Quote Originally Posted by XLAutomation View Post
    Eric Brooks says TC-1791. I was able to choose that, and get a good upload, make changes, and download successfully. Thanks, Eric!
    Can you share the calibration number or strategy? thanks
    Reply With Quote Reply With Quote
  4. 11-25-2024 #4
    hbmike
    hbmike is offline
    Tuner in Training
    Join Date
    Apr 2019
    Posts
    15
    Quote Originally Posted by mstang_man View Post
    Can you share the calibration number or strategy? thanks
    attached the base calibration read out. the alumniator with start and idle with this config.
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »