Results 1 to 18 of 18

Thread: 2016 6.7 Powerstroke Bin File

  1. #1
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12

    2016 6.7 Powerstroke Bin File

    Hi everyone, happy late new year...lol. I just purchased the MPVI2 and also the ezlynk software to tune my truck. I wanted to try tuning with the ezlynk first but I don't have any bin files for my model year and am wondering if anyone has them and would be willing to send them. Also, does hpt have the ability to adjust the idle tuning? Thanks!!!

  2. #2
    Quote Originally Posted by Toad0407 View Post
    Hi everyone, happy late new year...lol. I just purchased the MPVI2 and also the ezlynk software to tune my truck. I wanted to try tuning with the ezlynk first but I don't have any bin files for my model year and am wondering if anyone has them and would be willing to send them. Also, does hpt have the ability to adjust the idle tuning? Thanks!!!
    If you send post your .hpt read, i should be able to send you the .bin file.

  3. #3
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Will do, I am getting my MPVI2 later today so it should be sent by later on today.

  4. #4
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12

    Stock Read

    Here is the stock read for the TCM and the ECM. Thanks.

    ECM: 2016 F350 6.7-STOCK ECM.hpt

    TCM: [2016 F350 6.7-STOCK TCM.hpt

  5. #5
    Those files don't have the calibration numbers in them that I need to get the .bin. That is often a problem with the 2016 and older trucks. Can you read the calibration numbers with ezlynk?

  6. #6
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    What does the calibration number usually look like? How many digits? Thanks.

  7. #7
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    From the ezlynk technician page, I can see a cal ID and ECU number. I will post them below.

    Cal ID:
    F_SUPERDUTY_1516_67LTA

    ECU number:
    780505096043

  8. #8
    What I need looks like this. GC3A-14C204-APA

  9. #9
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Alright, do you know if forscan would read it?

  10. #10
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Got it.

    ECM: CPS$-FORD16-TSM

    TCM: GC3A-14C337-AC

  11. #11
    So I downloaded the .vbf from Ford for the TCM, but my software to convert it to a .bin doesn't work with it. I've never tried it on a TCM file before.

    The number you gave for the ECM isn't right. Was it tuned previously? I've seen them changed sometimes. It may be possible to figure out the software version by the DDDF2C5 in your .hpt file, but I've never figured out how.

    You can check with PSM 6.4. He has an add-on for WinOLS to open .vbf files which may help with the TCM. Idk if he'll have ideas for the ECM.
    Last edited by jr2185; 1 Week Ago at 09:48 PM.

  12. #12
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Yes, the truck was tuned previously. I'm going to try to upload the stock file again and see if it will change.

  13. #13
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    I contacted him before I made this thread about a week ago, but got no reply so far.

  14. #14
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    I loaded a stock tune from another tuner of mine. The code changed, posted below.

    ECM PN:
    FC3A-14C204-KE

  15. #15
    Quote Originally Posted by Toad0407 View Post
    I loaded a stock tune from another tuner of mine. The code changed, posted below.

    ECM PN:
    FC3A-14C204-KE
    Thats what I was looking for however it seems Ford no longer has that one on their server. I don't really have any other easy solution.

    Do you have Forscan? If so, have you ever used the version that can do flashing? That downloads .vbf files (the file I can convert to a .bin).

  16. #16
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    I think I might have the version that flashes, but I'm not sure.

  17. #17
    Tuner
    Join Date
    Dec 2015
    Location
    Grand Junction Colorado
    Posts
    91
    Just pm'd you the FC3A-KE VBF and Binary.

  18. #18
    Tuner in Training
    Join Date
    Feb 2020
    Posts
    12
    Pm sent. Big thanks to you and jr.