-
Advanced Tuner
Gen 2 f150 on control pack
I am working with a gen 2 f150 engine, a crate engine harness and a gen 2 control pack. I know the firing orders are different between the two. Mustang cams are on a nationwide backorder so I am trying to save a few bucks and use the truck cams. Can this be achieved just by changing ECM 44602 (spark firing order) and ECM 44510 (LTFT bank vs cylinder) or do I need to physically repin something in the harness?
-
Tuner in Training
i have mustang gt cams. never installed. you need?
-
Advanced Tuner
I got it taken care of, thank you.
It's a long story, I already had a set of gen 2 cams, ford rep told me they were for a gen 1 mustang (it turns out the exhaust cam is the same part as the 12/13 boss).
It turns out you need the 4 cams and exhaust phasers for the gen 2 truck engine if you want to run it off a mustang/crate engine tune. The exhaust phasers where why I thought I had the wrong cams.
Last edited by B E N; 01-26-2021 at 09:45 AM.