Results 1 to 2 of 2

Thread: Hello I am a first time user

  1. #1
    Potential Tuner
    Join Date
    Jan 2021
    Posts
    5

    Hello I am a first time user

    Hi,

    I have a running SC3800 swapped Fiero, 4 speed with some mods, full stack water to air intercooler, 3.2' smaller pulley, 47Lb injectors, free flow exhaust. Engine is a 97 Buick Riviera. I bought MPVI2 HP Tuners with 2 credits and activated it on my PC. What is the next step? Scan a read on the car? Car seems to run rich when started and at idle.

    I have experience having used a SCT4, fairly extensively working with VMP to liaise via email to tune my Roush Mustang.

    Sincerely,
    BA

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    scanning the vehicle and doing a read of the ecm is a good starting point.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"