My bank 2 injector pulsewidth started not reading today for some reason. The B1 is logging just fine and I have the channel for both banks turned on. Has anyone else had this issue or can help point me to a solution?
My bank 2 injector pulsewidth started not reading today for some reason. The B1 is logging just fine and I have the channel for both banks turned on. Has anyone else had this issue or can help point me to a solution?
Remove the channel while connected to the vehicle, then click vehicle at the top and down to re-poll for supported parameters. After that add the channel back in and start scanning. See if that works.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote