So I scaled Id1050's into a p01 and it looks like they are not limited to 63lb/hr. I was able to scale the 1050's. Is this true? Usually I would have to double stoich with early Ecm's.
So I scaled Id1050's into a p01 and it looks like they are not limited to 63lb/hr. I was able to scale the 1050's. Is this true? Usually I would have to double stoich with early Ecm's.
256 lb hr limit
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
You can put up to like 256lb/hr injectors in them with the right data.
Should be no need to scale those ID 1050's on that computer. If you have all the injector data you are good to go.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Awesome! I did use all the Id data. I was just kinda surprised that it let me go that high in the flow rate table. Thank you guys for verifying.