Results 1 to 3 of 3

Thread: New 4l60e combability with older ECM

  1. #1
    Tuner in Training
    Join Date
    Jan 2018
    Posts
    32

    New 4l60e combability with older ECM

    hello, i am trying to help a buddy, he has a 2000 5.3 swapped into his rig with red blue computer. The transmission is a 2011 4l60e from express van, it plugged in & its shifting 1-2-3 at high RPM, and doesnt down shift back to first unless you turn it off. the codes trans codes were pressure control related so he bought the manifold pressure switch based on the codes and googleing. pulls the pan and there isnt one. not like its missing, but like it wasnt there from factory. is this newer transmission compatible with his older ECU? i know they have gone over some revisions over the years. but not sure of the interchange. thanks

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,533
    I'm not a 4L60e guru but I know for sure that the connector plugs changed more than once over the years so the electronics are not the same.

    https://www.silveradosierra.com/tran...e-t699690.html

    That thread should help you.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,287
    He needs one with a 13 pin round plug. 2011 trans should have 17 pins.