im a noob to tuning this way always had a carb on my stuff. just want to see how far and how problem i will with to i get this tuning going. i have done a home port job on my 799 heads. Have put in a sloppy stage 2 cam shorty headers a CAI it is the stock 78mm tb with the stock truck intake and injectors its a L33 new bearings rods and mains, did the oil pump mod on stock pump. already had the ls2 timing chain in it with ls7 lifters & flat tops in it from stock reused with new rings. had the cut to 62cc 5 angle value job. and head studs also run a .050 head gasket. stock 4L60e and converter so that what i have also no WB yet just want to see if should run and drive to breakin the motor