AEM 03-0306 Boost

[dannarc]

Info needed

I found that VCM Scanner Beta has this channel from External Inputs/AEM/X-Series Boost Gauge (30-0306)/Boost Pressure

How to add/connect this gauge into Scanner. I see the gauge only with Analog to A/D Prolink. I don't see the CANbus integrated like AEM AFR X-series. Are they compatible with AEMNet CANbus to Prolink CANbus input?

little confuse here without good instruction on how to add in.

https://www.aemelectronics.com/files...ns/30-0306.pdf

1.PNG

[dr.mike]

The 30-0306 does has CAN data. But, I don't think the CAN pins are populated in the connector. They are easy to add. But... I don't think VCMScanner knows how to read MAP data from AEMNet ?

[dannarc]

same thing with question mark in this head.

Should we do an experiment again on this?

test CANbus bitrate 500kbps AEMnet (transmit 20hz) vs Prolink (sampling 100hz <-flex rate??)

ended with wrong reading. =overwhelming=

[Boosted CC]

Was the AEMnet used with VCM scanner using the boost gauge?