Boosting a jeep tj with a 4.0L

[Panda4.0L]

id like to start off with saying that I am a tuning noob but what I'm trying to do is put an HX35 into a jeep tj and run 6-8psi of boost, I know I need bigger injectors, a boost controller, a wideband AFR and boost gauge and last of all a tune if anyone out there is running a similar setup, some help would be much appreciated especially with insight on what you did also, if you have a tune file you wouldn't mind sharing that would be huge!
any help is much appreciated
thank you, Panda4.0L

[InnovativeDiesel]

I had a turbo on my TJ. Used a SRT4 map. It was a kit from Banks Performance, you can probably look up the instructions, parts list, and specs.