Results 1 to 18 of 18

Thread: Anyone have 17 zl1 auto c304 module stock read they can share.

  1. #1
    Advanced Tuner
    Join Date
    May 2006
    Location
    Waterbury CT.
    Posts
    293

    Anyone have 17 zl1 auto c304 module stock read they can share.

    I have a car with the active exhaust not working and want to be sure the c304 module has not been tuned so i need a compare file.

    Thanks in advance.

  2. #2
    Advanced Tuner
    Join Date
    Oct 2013
    Posts
    211
    Do you still need this?

  3. #3

  4. #4

  5. #5
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,366
    I don't have a ZL1 CCM handy but here is the same DTC config from a 2017 Z06 that I can guarantee is the stock tuning.

    ccm.PNG
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  6. #6

  7. #7
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,366
    I don't if this matters but this is from a manual Z06. Mode 0 is Tour mode for the Corvettes, Mode 1 is Sport, mode 2 is Track. On the Corvettes you can do a quiet startup in Tour mode which is why rumble is set to 0 in mode 0. If I remember correctly, Camaros don't allow quiet startup even in Tour mode and you have to go in and set it to stealth for a quiet startup. I could be wrong, but I thought thats what I remembered.

    ccm2.PNG
    Last edited by TriPinTaZ; 01-27-2021 at 01:53 PM.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  8. #8
    Advanced Tuner
    Join Date
    Oct 2013
    Posts
    211
    ccm read 6-7.hpt

    This from my personal car

  9. #9

  10. #10
    Advanced Tuner
    Join Date
    Oct 2013
    Posts
    211
    2017 a10 zl1

  11. #11

  12. #12
    Advanced Tuner
    Join Date
    Jun 2007
    Location
    Close to my Z06
    Posts
    271
    How does the flaps get the signal to open? is there a way to force it to stay close? I have a 2015 C7Z06

  13. #13
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,366
    Quote Originally Posted by HNK View Post
    How does the flaps get the signal to open? is there a way to force it to stay close? I have a 2015 C7Z06
    You can force them to do whatever you want. However, if you're asking if you can keep them closed during WOT events, that is not good. Yes you can do that, but you can also damage the motor.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  14. #14
    Advanced Tuner
    Join Date
    Jun 2007
    Location
    Close to my Z06
    Posts
    271
    Force them closed during testing only. They keep opening while in Tour, erratic. Can?t figure out why. I don?t see the active exhaust option in my tune. Is it from there where I can force to stay closed? If yes, they how come I don?t have that option showing under system?

  15. #15
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,366
    Quote Originally Posted by HNK View Post
    Force them closed during testing only. They keep opening while in Tour, erratic. Can?t figure out why. I don?t see the active exhaust option in my tune. Is it from there where I can force to stay closed? If yes, they how come I don?t have that option showing under system?
    Tour mode still had the valves open once you surpass ~ 4000 RPM.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  16. #16
    Advanced Tuner
    Join Date
    Jun 2007
    Location
    Close to my Z06
    Posts
    271
    Yes, but when in tour the valves open at much lower rpm or even idling or start up. I would be cruising in 7th gear around 1500 rpm and suddenly the open up and stay open regardless what. That?s why I was wondering if there is a way through Hptuners to just keep them shut

  17. #17
    Advanced Tuner
    Join Date
    Jun 2007
    Location
    Close to my Z06
    Posts
    271
    How do I go about forcing them to stay closed?

  18. #18
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,366
    Quote Originally Posted by HNK View Post
    How do I go about forcing them to stay closed?
    There is a thread on here and on Corvette forum that covers licensing the CCM and making changes to the NPP valves.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3