Results 1 to 5 of 5

Thread: 10r80 Select Shift

  1. #1
    Potential Tuner
    Join Date
    Sep 2016
    Posts
    5

    Exclamation 10r80 Select Shift

    Wondering if anyone has gotten the 10r80s to work like a few of the other transmissions, in regards to the paddles. What I am trying to achieve is to use the paddles to get the car to a certain gear..... then go WOT and have it auto shift up from there. I have built tunes for other applications and made this work, however this 10r80 is kicking my rear on this one. I thought it would use the (select shift WOT) under shift scheduling tab. I have tried to input lower than desired OSS numbers equating to about 6k engine rpms with still not results. This table comes stock set to 60,000 so I thought I had figured it out but still no luck.

    Thanks in advance for any input.

    Adam

  2. #2
    Advanced Tuner small tuner's Avatar
    Join Date
    Nov 2015
    Posts
    270
    interested to know

  3. #3
    6512 and 21567 im pretty sure

  4. #4
    Potential Tuner
    Join Date
    Feb 2020
    Posts
    4
    Did you guys figure this out? I'm trying to do exactly this.

  5. #5
    Tuner in Training
    Join Date
    Oct 2009
    Posts
    47
    You have to set the desired WOT shift OSS very low and it will work.