Results 1 to 5 of 5

Thread: can't find speed limiter tab on infiniti g37

  1. #1
    Potential Tuner
    Join Date
    Jan 2021
    Posts
    8

    Lightbulb can't find speed limiter tab on infiniti g37

    hey all.

    I am new to HPtuners, today was the first time I use it on a car, it was Infiniti g37 2011 sedan.
    I had a costumer came to take his speed limiter off.
    so after I made a 7 minutes read, I opened the file and chose speedo tab, but it was almost empty and I could not find the speed limiter button to adjust.
    can any one help? thanks!

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    In speaking with your Infiniti engineer we have not been able to find any speed limiter tables in the ecm definition hence the reason there are no speed limiter tables under the speedo tab.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Potential Tuner
    Join Date
    Jan 2021
    Posts
    8
    Quote Originally Posted by Bill@HPTuners View Post
    In speaking with your Infiniti engineer we have not been able to find any speed limiter tables in the ecm definition hence the reason there are no speed limiter tables under the speedo tab.
    Thanks a lot bill.
    That means I won't be able to remove the speed limiter from this car?
    Because the car is actually limited to 165mph

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    From what we can tell its not controlled by the ECM which is the only module we support for these applications.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Potential Tuner
    Join Date
    Jan 2021
    Posts
    8
    Quote Originally Posted by Bill@HPTuners View Post
    From what we can tell its not controlled by the ECM which is the only module we support for these applications.
    Ok, thanks for the help bill!