lsa engine will not rev over 4600 rpm sound like its hesitating.

[mitchb727]

have a lsa swapped vehicle
1170 cc x spurt injectors
2.25" upper stock lower
226/242 @.050" .608"/.605" 114 lsa
2x walbro 460s in surge tank
65psi with rising rate and -8 lines to rail

car seems to fall flat on its face at 4300 rpm and feels like its limited at 4600 will not rev above that can someone please check log and tune it is currently in maf tuning mode as i am tuning maf at the moment ? not sure if im just too rick not allowing engine to rev
-4 deg pulled on spark table

changed charger settings was stuck at 4psi and now i can see about 13.8psi after change
any help would be appreciated uploaded last log and current installed tune
thanks [ATTACH]106979 [/ATTACH]CURRENT MAF TUNING ! lsa 1kcc injectors -4deg spark maf tuning.hpt

[ABADZL1]

oil -40.png

Oil temp.png

Connect your oil temp sensor, or max this table

[pannetron]

If your OS shows this under "Engine Diagnostics" you might try setting it to "Calc ECM"...

2021-01-30_13-08-30.jpg

[mitchb727]

going to try the ecu temp I think that's what's wrong strange it only started after the cam swap i do not have a oil level/ temp sensor has always been missing using chev performance ecm and harness


my os is in calc ecm.

[mitchb727]

yep fixed my issue was the engine oil temp for some reason
thanks