Trying to setup Exhaust Flap Control, so that it is closed in normal Mode an Opened in Sportsmode.

Looked at tables supported in cobb/accesstuner, where it works.

but not all of these tables are shown in ECM-Editor.

This cobb configuration has closed flap unteil a specific load and the opens the "emergency Bypass/exhaust valve"

There are different tables I set exactly like in COBB, but for e.g. there is missing a table where I can select in which gear which exhaustflap table should be used

So, the red marked in the attached picure are not vissible in VCM-Edititor.

Does anybody have an Idea how to set up exhaust Flap, to silent in normal Mode, except WOT, and to open in sports mode?

not all in vcm editor.jpg