Hi Guys,
Got an LS7 equipped with the Fast 85LBS (part #30857-8) pump gas. Can you please list the steps & numbers needed to dial in those injectors.
Thank you
Hi Guys,
Got an LS7 equipped with the Fast 85LBS (part #30857-8) pump gas. Can you please list the steps & numbers needed to dial in those injectors.
Thank you
There is no data, pretty much have to come up with your own, been doing that for years on the FAST injectors
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
True, I was looking for something to start with, some ballpark figures
trash it, dont waste your time and if its a customer they will not be happy and will blame you
Follow @MASTUNING visit www.mastuned.com
Remote Tuning [email protected]
Contact/Whatsapp +966555366161
I try to explain to customers that bring cheap injectors with no data (or even sub-par EMS systems) that while they may save on the initial cost of the injector when buying cheap ones, they will spend much more than the difference through tuning costs to try and figure the data out the hard way through trial and error. As Sultan said, ditch them and get something that has good data and save everyone the headache.
Ironically, those injectors came along with the Mast Black Label 900 motor, which I believe is Mast's most expensive crate motor. The motor is brand new, so I won't be able to replace the injectors as the motor is under warranty. As always Sultan, I appreciate your advice.
I would call MAST for injector help.
1961 C-10 5.3 NV3500
2007 NNBS ECSB 4.8
One would think with the price that they charge, they would have those injector characterized.
1961 C-10 5.3 NV3500
2007 NNBS ECSB 4.8