Results 1 to 2 of 2

Thread: Jeep JK 2007 Wrangler = Traction control permanently off

  1. #1
    Potential Tuner
    Join Date
    May 2020
    Posts
    3

    Jeep JK 2007 Wrangler = Traction control permanently off

    Hi

    Looking for a means to fully and always disable the traction control on a 2007 Jeep JK 3.8 v6
    Any ideas and pointers welcome (software solution first otherwise, perhaps and arduino and a relay to simulate a button press on each startup)

    thanks

  2. #2
    Tuner Dozer's Avatar
    Join Date
    Jul 2007
    Location
    Sparks NV
    Posts
    106
    Yes you can. Engine Tab / General/ Engine / Displacement 3.8L.

    If you hold the mouse pointer over Displacement tab a description will pop us at the bottom [ECM] 13512 Setting this value to anything other then the stock value will disable ESP/Traction Control.

    Change it to 0 and TC will be off. Your TC light will always be illuminated on the dash. Well it is on my jeep changing it to 0 but by by TC.