Results 1 to 4 of 4

Thread: CAM TIMING SETUP M6550 3V FORD 12MM 2007 mustang 4.6 3v

  1. #1
    Tuner in Training
    Join Date
    Dec 2016
    Location
    Lake Havasu City AZ.
    Posts
    11

    CAM TIMING SETUP M6550 3V FORD 12MM 2007 mustang 4.6 3v

    I just installed a set of ford perfomance m6550 hotrod cams and per the set up instructions they call for a timing change to retard the cam from the factory setting of zero at idle im not sure exactly what timing map i should be looking at in hp tuners the cam timing graph in the installation paperwork dose not look like anything i can find in my hp tuner any hopefully i am explaining this properly any help would be welcome/appreciated

  2. #2
    Advanced Tuner
    Join Date
    Jun 2008
    Location
    Tyler/Longview, TX area
    Posts
    746
    Pulled this file from Tune Repository. Description: JLT III CAI, CMDP's, FRPP Ported Heads, Hot Rod's, LTH, OR-H w/Cat's, UDP's Spark set for 93 octane. 2006 Mustang GT, 4.6L, 5-speed manual car, no driveability concerns at all. solid
    Attached Files Attached Files

  3. #3
    Potential Tuner
    Join Date
    Feb 2023
    Posts
    1
    If possible could ou send me the above tuning file as well.

  4. #4
    Tuner in Training
    Join Date
    Dec 2016
    Location
    Lake Havasu City AZ.
    Posts
    11
    Thanks for the reply i will visit this tune tune file