2020 Mustang GT 10R80
Cobra Jet Intake Manifold
Steeda CAI
CFM Twin 67mm Throttle Body with JMS Throttle Max (If anyone has good TB Data for this throttle body or a Twin 65mm for the 2018+, please let me know!)
E85
Hello,
I have here a 2020 Mustang GT 10R80 that is throwing a Wrench light in 6th gear on the dyno and stays on even with ignition cycles. Codes P0600 and P27B5 illuminates every time.
Screenshot (6).png
I've tried putting everything in the trans back to stock, but no improvement. I even went and used the stock throttle body data and no improvement.
I raised all the limits that I know of since in 5th gear the engine will spin to 8000rpms. Is there something I'm missing? I've searched through the forums but no concrete solution.
I only hit FMEM in 6th gear. around 6800RPMs-7200RPMs
6th gear FMEM Trans.hpl
6 gear fmem patch removed.hpl
5th Gear full pull no fmem.hpl
Anthony 2020 Mustang gt E85 base 2.hpt
Anthony 2020 Mustang gt stock file pulled.hpt
Here are 3 logs and 2 Tune files, one modified and one stock.
Thank you