Results 1 to 1 of 1

Thread: Timing issues down low.

  1. #1
    Potential Tuner
    Join Date
    Mar 2021
    Posts
    2

    Timing issues down low.

    I don?t know why my last tuner left idle and the bottom left and left top is set at 6 degrees. This is a built 392. Cammed whipple 2.9 l blower. It is slug driving around. We added a few degrees to 9 before a retune on the dyno and some data logging. My tuner said my timing map in midrange and up top is way too conservative as well. I run 9.8 Manley pistons with methanol injection. I?m not asking what I should put as every set up is different. But common. Lol 6 isn?t gonna do it. But 9 awaken her A lot. A nice starting point for idle low and up. Would atleast like a ballpark for personal knowledge. Thanks again guys .
    Last edited by Steve1973; 03-08-2021 at 06:57 PM.